This is a review of Microsoft Doc#: H100693 to see what testing criteria Imatest Master and Imatest IT can satisfy. Please contact support@imatest.com with any questions.
|
Certification Metric |
Pg# |
Status |
Notes |
|
Support USB Video Class (UVC) Driver |
11 |
Not Supported |
no plan to support, instructions for checking driver included |
|
Support USB Audio Class (UAC) Driver |
12 |
Not Supported |
no plan to support, instructions for checking driver included |
|
Product driver signed by Microsoft (WHQL) |
13 |
Not Supported |
no plan to support, instructions for checking driver included |
|
Method to control video processing in driver/camera |
13 |
Not Supported |
Executables for testing face detection and noise reduction are referenced. |
|
P1: CPU usage |
14 |
Not Supported |
GraphEdit2 software recommended for testing acquisiton |
|
P2: Method to determine camera position, orientation |
16 |
Not Supported |
Windows Logo Kit and TestCameraLocationInterface Executables referenced for testing location |
|
P2: Embedded camera shipping protection |
17 |
Not Supported |
Requires physical inspection |
|
P1: Latency |
18 |
Not Supported |
LyncVidCap utility provides the latency measurments. |
|
P1: Jitter |
19 |
Not Supported |
LyncVidCap utility provides the jitter measurments. A video testing version of Imatest is a long term project that will support this measurement (2013) |
|
P1/P2: Time to capture first image, change resolutions |
20 |
Not Supported |
LyncVidCap utility provides this measuremnt |
|
Certification Metric |
Pg# |
Status |
Notes |
|
P1/P2: Image resolutions, frame rates, color spaces |
20 |
Not Supported |
LyncVidCap utility provides the frame rate |
|
P1: Image resolution quality: MTF |
24 |
Supported by SFR and SFRplus modules |
MTF30 measurments need to be selected in secondary readout settings of Imatest in order to be produced. Edge angle should be between 4-6 degrees |
|
P1: Image resolution quality: oversharpening |
24 |
Supported by SFR and SFRplus modules |
part of SFR output |
|
P1: Image resolution quality edge roughness |
24 |
Supported by SFR and SFRplus modules |
part of SFR output |
|
P1: Image dynamic range |
29 |
Supported by stepchart module |
Spec says ISO-15739 chart, but displays ISO-14524 chart |
|
P1: Image spatial SNR |
33 |
Supported by stepchart module |
|
|
P1: Image temporal SNR |
34 |
Supported by stepchart module |
multiple images can be read at once into Imatest IT |
|
P1: Gamma |
36 |
Supported by stepchart module |
|
|
P1: Relative illumination |
38 |
Supported by Uniformity / Light Falloff |
also supported by blemish detect module |
|
P1: Field of view |
42 |
Supported by sfrplus module |
Requires chart height (vertical bar to bar in cm), and lens-chart distance in cm to be set for proper calculations |
|
Certification Metric |
Pg# |
Status |
Notes |
|
P1: Depth of field |
43 |
Supported by SFR and SFRplus |
Automated testing machine would be beneficial for testing multiple ranges with Imatest IT. |
|
P1: Automatic exposure and gain |
44 |
Supported by Stepchart |
Terms B1, B2, W1, W2 can be pulled from two separate stepchart results. |
|
P1: Geometric distortion |
45 |
Supported by Distortion module |
Imatest SFRplus and dot pattern modules can also produce SMIA TV distortion |
|
P1: Pixel aspect ratio |
47 |
Supported by Distortion module |
Imatest SFRplus also produces this metric |
|
P1: Color accuracy and saturation |
49 |
Supported by Colorcheck module |
Imatest SFRplus with a Color SFRplus test chart can also produce these data |
|
P1: Anti-flicker solution |
53 |
Not Supported |
A video testing version of Imatest is a long term project that will support this measurement (2013) |
|
P1: Autofocus performance |
55 |
Supported by SFR module |
Once video frames can be pulled out they can be analyzed with SFR or SFRplus |
|
Manual-focus performance |
56 |
Supported by SFR module |
matest does not yet do is integrate with LyncVidCap in order to acquire images or adjust settings automatically |
|
P1: Audio/video synchronization |
56 |
Not Supported |
A video testing version of Imatest is a long term project that will support this measurement (2013) |
|
P1: Lower resolution images must give higher SNR |
58 |
Supported by Stepchart module |
|
|
P1: Veiling glare |
59 |
Supported by Stepchart module |
Needs to have stepchart incorporated with the “black hole”. Standalone measurments can be added in near term |
Summary
13 of the testing areas are not supported, 18 of the testing areas are supported, so 58% of the tests can be assisted by the use of Imatest Master and Imatest IT.