December 2011 Newsletter: CPIQ Dot Pattern, 4:1 Contrast Charts

Imatest Supports I3A Camera Phone Image Quality Standards Imatest now has strong support for I3A (International Imaging Industry Association) CPIQ (Camera Phone Image […]

Skype Recommends Imatest For Video Quality Testing

Update You can find the latest Skype/Lync standards documents here: The Skype Hardware Certification Specifications version 5.0 recommends imatest for […]

Imatest 3.8 Released

Imatest 3.8 was released on May 14th 2011.   Please contact for purchase or renewal information. Here is a complete list […]

Matlab Compiler Runtime (MCR) versions

Imatest requires installation Matlab Compiler Runtime (MCR) in order to run. Different versions of Imatest depend on different versions of the library […]

Advances in Testing Infrared Camera Systems

New infrared test charts and analysis software modernize testing of infrared cameras Once viewed as exotic devices, infrared camera systems […]

Path conflicts when other versions of Matlab are installed

X   The procedure entry point svDoubleSclarRemW could not be located in the dynamic link library libmwservices.dll If a different version […]

April 2010 Newsletter

Now Available – Infrared Test Charts Imatest’s new Infrared SFRplus test charts support testing of visible light through Medium Wavelength […]

Legacy Registration (v3.7 and below)

Register imatest The following paragraphs apply to Imatest Studio 4.1 and earlier and to other Imatest versions 3.7 and earlier. For […]

Imatest 3.4 with 3D plots released

3D plots with automatic or manual scaling are available in SFRplus and Light Falloff. These plots can be rotated for […]

Function ‘get_param’ is not implemented in standalone mode

Affects:  Version 3.5.1 and below. The following message appears several times in the DOS window when you try to save […]

Optical Research Associates Case Study

Imatest partners with ORA to deliver customized charts and software ORA Finds Imatest Charts and Software to be Just the […]

Pelco is Secure Using Imatest to Manage Image Quality

In the world of video security systems, a picture is worth a thousand words, but only if the picture is […]

Imatest Partners with ON Semi to Speed CMOS Sensor Configuration

CMOS sensor R&D is enabled by Imatest There are no shortcuts in the process of CMOS image sensor configuration. There […]

Master 3.2 with automatic test execution Released

Release 3.2 of Imatsest Master includes SFRplus, a new capability that automatically identifies regions of interest (ROI) and helps you […]

Imatest 3.1 released

Multiple files can be read and averaged (and saved) to facilitate measurements of fixed-pattern noise (in Stepchart, Colorcheck, and Light […]

Imatest 3.0

Imatest Master and Studio have been introduced, replacing Pro and Light. Support for Bayer RAW images has been strengthened.

Imatest 2.7

The new Dynamic Range module calculates dynamic range from Several Stepchart images of reflective targets (much easier than using transmission […]

Imatest 2.6.11

The Screen Patterns module displays several patterns for Imatest modules, monitor calibration, and camera testing.

Imatest 2.6.8

Spot detection is now available in Light Falloff. CIEDE2000 color difference metrics are now available in Multicharts and Colorcheck.

Imatest 2.6

Two new options are available for refining multiple ROI selections in repeated SFR runs (Imatest Master only). (1) Multi-ROI fine […]